E-aniani Fiberglass i ʻoki ʻia no ka PP&PA Resin
Ua ʻoki ʻia ka fiber aniani ʻokiʻoki mai ka E-glass roving, i mālama ʻia e ka mea hoʻohui hoʻohui i ka silane a me ke ʻano hoʻohālikelike kūikawā, maikaʻi ka hoʻohālikelike a me ka hoʻopuehu ʻana me PP&PA.Me ka pololei strand maikaʻi a me ka flowability.ʻO nā huahana i hoʻopauʻia he mauʻano kino a me ka mechanical maikaʻi a me ka nānāʻana i kaʻili.
Nā hiʻohiʻona huahana
1.Applicable i nā resins thermoplastic a me thermosetting, kūpono maikaʻi me nā resins, ikaika huahana kiʻekiʻe
2. Hoʻohuiʻia me ka resin, wikiwiki ka permeability a mālamaʻia ka resin
3.Excellent kala kala a me ka hydrolysis kū'ē
4.Good dispersion, keʻokeʻo keʻokeʻo, maʻalahi ke kala
5.Good strand pono a me ka haʻahaʻa static
6.Good pulu a maloʻo fluidity
Nā Kaʻina Hoʻokuʻu a me ka Hoʻokuʻu ʻana
Hoʻohui ʻia nā mea hoʻoikaika (nā kaula aniani i ʻoki ʻia) a me ka resin thermoplastic i kahi extruder.Ma hope o ka hoʻoluʻu ʻana, ʻokiʻoki ʻia i loko o nā pellet thermoplatic i hoʻoikaika ʻia.Hāʻawi ʻia nā pellets i loko o kahi mīkini hoʻoheheʻe inject e hana i nā ʻāpana i hoʻopau ʻia.
Palapala noi
Hoʻohana nui ʻia nā kaula ʻoki ʻia PP no ka hoʻoikaika ʻana i nā thermoplastics i loko
hui pū me masterbatch.
Papa inoa huahana:
| Inoa mea kūʻai | ʻO nā kaula fiberglass ʻoki ʻia no PP&PA |
| Anawaena | 10μm/11μm/13μm |
| ʻoki ʻia ka lōʻihi | 3/4.5/5mm etc |
| kalakala | keʻokeʻo |
| Hiki ke ʻoki (%) | ≥99 |
| ʻAno wai (%) | 3,4.5 |
Nā ʻāpana ʻenehana
| Anawaena Filament (%) | ʻAno wai (%) | Nui maʻiʻo(%) | ʻOki lōʻihi (mm) |
| ±10 | ≤0.10 | 0.50 ±0.15 | ±1.0 |
Hoʻopili ʻike
Hiki ke hoʻopaʻa ʻia i loko o nā ʻeke nui, pahu hana kaumaha a me nā ʻeke i ulana ʻia;
ʻo kahi laʻana:
Hiki i nā ʻeke nui ke paʻa i ka 500kg-1000kg i kēlā me kēia;
Hiki i nā pahu pahu pahu a me nā ʻeke i ulana ʻia i hui pū ʻia ke paʻa i 15kg-25kg kēlā me kēia.
